Hi Folks,
I am getting the above mentioned error(CMOS checksum error, Defaults loaded) when I boot up my machine. The maching than sort of re-boots by itself after that and it loads windows 7 proper. What should I do to recitfy the above error? Thanks in advance.
regards
glisando
Page 1 of 1
Cmos Checksum Error, Defaults Loaded
#2
Posted 21 April 2012 - 05:47 AM
Hi. I would be looking the the CMOS battery on the Motherboard ( somewhere around the expansion slots ). It may need changing.
This post has been edited by coastie65: 21 April 2012 - 11:29 AM
Coolermaster HAF 912 Case....ASUS P8Z68-VPro MOBO.....Intel Core i7 2600k Sandy Bridge ( 4.4 Ghz ).... Gelid Tranquillo cooler.... Samsung 830 256 GB SSD.... Primary HDD- WD 1TB Caviar Black SATA III /6.0 .... SECONDARY HDD - WD 1TB Caviar Black SATA II / 3.0....8Gb GSkill Ripjaws Series X 1600 Mhz Memory....Corsair AX850w PSU....EVGA GTX 680 Super Clocked Signature 2 Gb GDDR5 Video Card....Samsung CD/DVD RW, DL, DVD-Ram, w/ Lightscribe Optical Drive....Samsung SyncMaster 2243BWX 22" Monitor..... Windows 7 Home Premium 64 Bit OS
http://novabench.com/image/266589.png
______________________________________________________________
Gateway FX6800-01e----Intel Core i7 960 ( 3.2 GHz)---- Seagate Barracuda 750 Gb SATA II / 3.0 Hdd---- 6 Gb Crucial 1066 Mhz memory, running in Tri Channel conf-----Corsair TX650w PSU----- EVGA Nvidia GTX 560Ti 1gb GDDR5 Vram ----DVD +/- RW / CD ,RAM/DL Optical drive w/ Label Flash-----Gateway TBGM-01 Motherboard.... Vista Home Premium 64 bit OS w/ SP2; Samsung Synch Master 2243BWX 22" Monitor.
http://novabench.com/image/266589.png
______________________________________________________________
Gateway FX6800-01e----Intel Core i7 960 ( 3.2 GHz)---- Seagate Barracuda 750 Gb SATA II / 3.0 Hdd---- 6 Gb Crucial 1066 Mhz memory, running in Tri Channel conf-----Corsair TX650w PSU----- EVGA Nvidia GTX 560Ti 1gb GDDR5 Vram ----DVD +/- RW / CD ,RAM/DL Optical drive w/ Label Flash-----Gateway TBGM-01 Motherboard.... Vista Home Premium 64 bit OS w/ SP2; Samsung Synch Master 2243BWX 22" Monitor.
#3
Posted 21 April 2012 - 09:30 AM
I agree with coastie. The CMOS battery is probably right next to the PCIe x16 slot (where you can put a graphics card), and is typically a CR2032. (you can get these at a place like CVS, for instance)
Spoiler
"The Internet will be used for all kinds of spurious things, including fake quotes from smart people." -Albert EinsteinNeed a Windows ISO image?
#4
Posted 22 April 2012 - 08:46 AM
The biggest clue to whether the CMOS battery is dead or dying would be what date your system comes up with after it does finally boot. If it is an older date and not current, the battery is surely the fault. Loading the default settings is also enother clue.
Share this topic:
Page 1 of 1
Help













