Dear Sir,
I was using my home computer with an Intel 850MV motherboard, 256MB RDRAM @ 600Mhz, ASUS V7100 Pro, PixelView PCI TV Tuner & Audigy2 on a 300W Power Supply, for some years now. Recently, I wanted to upgrade & get myself the following:
1. 500W power supply, as I was going to use the same cabinet;
2. Asus Motherboard P5GC-MX (1333 capable);
3. Intel Core 2 Duo 1.66 GHz;
4. 1GB DDR2 @ 667 Mhz RAM;
5. SATA HDD;
6. Pinnacle USB Stick Pro;
Currently I intend to set up the system only on these and later add my Audigy & and an ATI 2 series PCIx card with 256MB VRAM.
After changing to the new MB, CPU, RAM, Audigy & HDD, on the old Power Supply, I installed Windows XP with SP2 (Licensed), and all the MB drivers and the Pinnacle TV tuner I watched TV for sometime & shut down the system.
Next day, when I tried to boot up the system, I get an error right after the POST that says:
'USB device over current status detected
your computer will reboot in 15 seconds!'
and it does reboot by itself.
I have tried every trick in the book like clearing the BIOS via jumpers.
Disconnected all USB devices (there never was a powered USB device connected anytime).
Dismantling & reassembling the whole system.
Now I have taken out the Audigy too & changed to the new 500W SMPS.
It's been 3 days now & everytime I try to boot the system, I get the same error, the computer is never booting into Windows.
Could you please give me a solution to this problem? I have searched the web to find that this is not a new problem but there seems no proper solution is available to this one either. Do I need to change the MB?
Looking forward to your feedback.
Anupam Bhoumick